Monday, 22 May 2017 12:29

Electrosorption

Rate this item
(0 votes)
  1. Technical Description
  2. Plant Design
  3. Feed Water
  4. Desalinated Water & Brine
  5. Data and Information
  6. Preferred Use
  7. Environmental Impact
  8. Stage of Maturity
  9. Further Developments
  10. References

1. Technical Description


 

Electrosorption is a technology to remove ions from water by applying an electrical voltage difference between two porous carbon electrodes, in which ions will be temporarily stored.

CDI is a technology also known as Electrochemical Demineralization 〈1〉 or as Electrosorption 〈2〉. CDI's preferred use is in low salinity desalination applications (in principle below 10,000 ppm (1), in practice below 4,000 ppm (4)), where the benefit is lower energy consumption and higher recovery rates in comparison to Reverse Osmosis (RO) or distillation as alternative methods of brackish water desalination. This is mainly because CDI removes only salt ions, i.e. a tiny mass, from the salty feed water, whereas in RO or distillation a massively larger mass of water is removed from the salty feed water (1).

 

2. Plant design


 

The humidification dehumidification (HD) process uses the temperature dependence of the vapour pressure of water in air. The vapour pressure of water in air at saturation rises exponentially with the temperature. The dependence can be approximated e.g. by the Antoine equation:

Read 2243 times Last modified on Monday, 22 May 2017 12:32
More in this category: « Desorption Adsorption »

Leave a comment

Make sure you enter all the required information, indicated by an asterisk (*). HTML code is not allowed.